# Save state - Reset state in Simulation Control

**URL:** <https://tech-community.robotics.abb.com/t/save-state-reset-state-in-simulation-control/9546>\
**Category:** UpFeed\
**Created:** [June 3, 2020, 6:39am UTC](https://tech-community.robotics.abb.com/t/save-state-reset-state-in-simulation-control/9546 "2020-06-03T06:39:20Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Maxim](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/maxim/32/4429_2.png) [@Maxim](https://tech-community.robotics.abb.com/u/Maxim)\
**Post date:** [June 3, 2020, 6:39am UTC](https://tech-community.robotics.abb.com/t/save-state-reset-state-in-simulation-control/9546/1 "2020-06-03T06:39:20Z")

</div>

Hello everyone!

We would like to know what kind of use cases and/or problems there are with the Save State and Reset State in Simulation Control (Simulation Tab in RobotStudio).

Please let us know your experience with this feature.

Thank you!

---

<div class="post-metadata">

**Author:** ![egor](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/egor/32/2735_2.png) [@egor](https://tech-community.robotics.abb.com/u/egor)\
**Post date:** [July 15, 2020, 12:43pm UTC](https://tech-community.robotics.abb.com/t/save-state-reset-state-in-simulation-control/9546/2 "2020-07-15T12:43:07Z")

</div>

I use this option to save the start state of station environment. Sometimes it is necessary to reset twice or more to return to saved state.

---

<div class="post-metadata">

**Author:** ![GayatriS](https://avatars.discourse-cdn.com/v4/letter/g/7ba0ec/32.png) [@GayatriS](https://tech-community.robotics.abb.com/u/GayatriS)\
**Post date:** [August 17, 2020, 12:50pm UTC](https://tech-community.robotics.abb.com/t/save-state-reset-state-in-simulation-control/9546/3 "2020-08-17T12:50:38Z")

</div>

I am facing the same issue.