# Screen Maker Button Set Reset with Digital Input **URL:** \ **Category:** Robot Controller\ **Created:** [March 31, 2025, 12:44am UTC](https://tech-community.robotics.abb.com/t/screen-maker-button-set-reset-with-digital-input/11852 "2025-03-31T00:44:08Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![imnisarahmed](https://avatars.discourse-cdn.com/v4/letter/i/bcef8e/32.png) [@imnisarahmed](https://tech-community.robotics.abb.com/u/imnisarahmed)\ **Post date:** [March 31, 2025, 12:44am UTC](https://tech-community.robotics.abb.com/t/screen-maker-button-set-reset-with-digital-input/11852/1 "2025-03-31T00:44:08Z")
Dear experts, I have added two new buttons to the FP screen using a screen maker. The buttons are working without any issues when pressed by manually. I have created Button-1, which SETS signal A and RESETS signal B when pressed. Similarly, Button-2 SETS signal B and RESETS signal A when pressed. Additionally, when Button-1 is selected, it resets Button-2, and when Button-2 is selected, it resets Button-1. My requirement is to select/deselect the button with digital input (DI) “system on auto”. When this DI becomes true, it should select button-1 and deselect button-2 and when this DI becomes false, it should deselect button-1 and select button-2 by itself. Thanks Long story short, the button should have both options: 1-The operator can manually select/deselect Button-1 and Button-2. 2-These buttons should also perform the same function via DI as the operator does manually. Best regards, Tech Ahmed ---
**Author:** ![Roberto\_González](https://avatars.discourse-cdn.com/v4/letter/r/ebca7d/32.png) [@Roberto\_González](https://tech-community.robotics.abb.com/u/Roberto_Gonz%C3%A1lez)\ **Post date:** [May 13, 2026, 9:53am UTC](https://tech-community.robotics.abb.com/t/screen-maker-button-set-reset-with-digital-input/11852/2 "2026-05-13T09:53:24Z")
Hi, Do you have the program released?