# ScreenMaker and RS5.12

**URL:** <https://tech-community.robotics.abb.com/t/screenmaker-and-rs5-12/2739>\
**Category:** ScreenMaker\
**Created:** [May 5, 2009, 3:02pm UTC](https://tech-community.robotics.abb.com/t/screenmaker-and-rs5-12/2739 "2009-05-05T15:02:09Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Thomas.Schweren](https://avatars.discourse-cdn.com/v4/letter/t/ecb155/32.png) [@Thomas.Schweren](https://tech-community.robotics.abb.com/u/Thomas.Schweren)\
**Post date:** [May 5, 2009, 3:02pm UTC](https://tech-community.robotics.abb.com/t/screenmaker-and-rs5-12/2739/1 "2009-05-05T15:02:09Z")

</div>

Hi there,

i had to setup my PC completely new due to some deleted things…

Now i have instlled RAB 5.12, RS 5.12 and RW 5.12.  
Finally i installed the recompiled Screenmaker 5.12. Whn i then start RS 5.12 with a controller active, and try o start ScreenMaker, the attached error message comes up.

![](http://forums.robotstudio.com/webwiz/115/Error.jpg)

Who can give me a help on this???

This is an urgent item, as i wanted to show the Screenmaker next week in an internal produt presentation to make the guys promoters of Screenmaker…

Regards  
Thomas

---

<div class="post-metadata">

**Author:** ![carlosmtz2000](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@carlosmtz2000](https://tech-community.robotics.abb.com/u/carlosmtz2000)\
**Post date:** [May 5, 2009, 3:52pm UTC](https://tech-community.robotics.abb.com/t/screenmaker-and-rs5-12/2739/2 "2009-05-05T15:52:08Z")

</div>

Hi Thomas,

This erros comes when there is a mismatch in the version. We will try to fix these errors.

In the meantime, where did you get ScreenMaker 5.12?

Thanks

---

<div class="post-metadata">

**Author:** ![sunil\_sabut](https://avatars.discourse-cdn.com/v4/letter/s/e274bd/32.png) [@sunil\_sabut](https://tech-community.robotics.abb.com/u/sunil_sabut)\
**Post date:** [May 6, 2009, 4:46am UTC](https://tech-community.robotics.abb.com/t/screenmaker-and-rs5-12/2739/3 "2009-05-06T04:46:48Z")

</div>

Hi Thomas  
which build of Screen Maker 5.12 are you using ? if it is the latest Screen Maker 5.12 executable (ScreenMaker.5.12.3076.0138), then please try to remove your RAB 5.12 from your laptop /PC and then load the above Screen maker build. you may get a solution …

Try a released build of RS5.12 ( Avoid any RS 5.12 Revision build)

Let’s know if you could get a solution.

Regards

---

<div class="post-metadata">

**Author:** ![Thomas.Schweren](https://avatars.discourse-cdn.com/v4/letter/t/ecb155/32.png) [@Thomas.Schweren](https://tech-community.robotics.abb.com/u/Thomas.Schweren)\
**Post date:** [May 6, 2009, 9:51am UTC](https://tech-community.robotics.abb.com/t/screenmaker-and-rs5-12/2739/4 "2009-05-06T09:51:03Z")

</div>

Hi,

during the test of the RW 5.12 release candidate here in germany we got contact with Steve via Jonas Stigeberg and he gave us the version 0135.

This i have used even with an installed RAB 5.12 RC without problems, therefore i reused it with the final RS version and the final RAB version installed as well, resulting in the posted error…

Regards  
Thomas

PS.: By the way, we (you or who else at ABB) should post the latest verson always at the download page in the developer section…

---

<div class="post-metadata">

**Author:** ![Steve\_Murphy](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@Steve\_Murphy](https://tech-community.robotics.abb.com/u/Steve_Murphy)\
**Post date:** [May 18, 2009, 10:30am UTC](https://tech-community.robotics.abb.com/t/screenmaker-and-rs5-12/2739/5 "2009-05-18T10:30:40Z")

</div>

There is a ScreenMaker 5.12 CTP “recompile” now available for download on the Downloads site.

Steve