# Screenshot

**URL:** <https://tech-community.robotics.abb.com/t/screenshot/925>\
**Category:** RobotStudio\
**Created:** [November 13, 2006, 1:50pm UTC](https://tech-community.robotics.abb.com/t/screenshot/925 "2006-11-13T13:50:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![RussG](https://avatars.discourse-cdn.com/v4/letter/r/f07891/32.png) [@RussG](https://tech-community.robotics.abb.com/u/RussG)\
**Post date:** [November 13, 2006, 1:50pm UTC](https://tech-community.robotics.abb.com/t/screenshot/925/1 "2006-11-13T13:50:57Z")

</div>

Hi

Is it possable to print a screnshot from inside RS for purpose of training manuals etc; If so where is this feature.

---

<div class="post-metadata">

**Author:** ![Johannes\_Weiman\_old\_account](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/johannes_weiman_old_account/32/3345_2.png) [@Johannes\_Weiman\_old\_account](https://tech-community.robotics.abb.com/u/Johannes_Weiman_old_account)\
**Post date:** [November 14, 2006, 8:25am UTC](https://tech-community.robotics.abb.com/t/screenshot/925/2 "2006-11-14T08:25:16Z")

</div>

Hi Russell,

Screenshot functionality will be included in RS 5.08. Until then you’ll have to settle for the PrintScreen key.

regards,  
Johannes