# Sensors - disable detection temporary

**URL:** <https://tech-community.robotics.abb.com/t/sensors-disable-detection-temporary/11305>\
**Category:** RobotStudio\
**Created:** [December 13, 2023, 1:24pm UTC](https://tech-community.robotics.abb.com/t/sensors-disable-detection-temporary/11305 "2023-12-13T13:24:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Henry123](https://avatars.discourse-cdn.com/v4/letter/h/3ec8ea/32.png) [@Henry123](https://tech-community.robotics.abb.com/u/Henry123)\
**Post date:** [December 13, 2023, 1:24pm UTC](https://tech-community.robotics.abb.com/t/sensors-disable-detection-temporary/11305/1 "2023-12-13T13:24:30Z")

</div>

Hi,

is there a possibility to disable the the property “Detectable by Sensors” temporary via a Signal?

The aim is to use invisible parts during a Simulation. And these invisible parts/Component Groups shall not be detected by any sensor.

thanks in advance