# servospot

**URL:** <https://tech-community.robotics.abb.com/t/servospot/5278>\
**Category:** UpFeed\
**Created:** [December 18, 2012, 6:50am UTC](https://tech-community.robotics.abb.com/t/servospot/5278 "2012-12-18T06:50:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Oliver111](https://avatars.discourse-cdn.com/v4/letter/o/5fc32e/32.png) [@Oliver111](https://tech-community.robotics.abb.com/u/Oliver111)\
**Post date:** [December 18, 2012, 6:50am UTC](https://tech-community.robotics.abb.com/t/servospot/5278/1 "2012-12-18T06:50:50Z")

</div>

I created a spotweld system with a servogun.when I jog the servogun with virtual plexpendant, the gun open size cannot match the position,I have change the transmission manytimes,why? Thanks All.

---

<div class="post-metadata">

**Author:** ![Anders\_S](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anders\_S](https://tech-community.robotics.abb.com/u/Anders_S)\
**Post date:** [December 20, 2012, 3:03pm UTC](https://tech-community.robotics.abb.com/t/servospot/5278/2 "2012-12-20T15:03:11Z")

</div>

Hi,  
Unfortunately is it not possible to simulate the movement of servo guns in RobotStudio.

---

<div class="post-metadata">

**Author:** ![Keke](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/keke/32/193_2.png) [@Keke](https://tech-community.robotics.abb.com/u/Keke)\
**Post date:** [October 10, 2017, 6:28am UTC](https://tech-community.robotics.abb.com/t/servospot/5278/3 "2017-10-10T06:28:07Z")

</div>

Has there been any changes to this subject lately?