# Signal Analyser Online dosen't work RS 6.07

**URL:** <https://tech-community.robotics.abb.com/t/signal-analyser-online-dosent-work-rs-6-07/8248>\
**Category:** UpFeed\
**Created:** [May 22, 2018, 10:10am UTC](https://tech-community.robotics.abb.com/t/signal-analyser-online-dosent-work-rs-6-07/8248 "2018-05-22T10:10:41Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ErikHagman](https://avatars.discourse-cdn.com/v4/letter/e/3ab097/32.png) [@ErikHagman](https://tech-community.robotics.abb.com/u/ErikHagman)\
**Post date:** [May 22, 2018, 10:10am UTC](https://tech-community.robotics.abb.com/t/signal-analyser-online-dosent-work-rs-6-07/8248/1 "2018-05-22T10:10:41Z")

</div>

Hello!

Have tried 32 and 64 bit but Signal Analyzer doesn’t seem to be working. Anyone else with this problem?

---

<div class="post-metadata">

**Author:** ![Dmitry](https://avatars.discourse-cdn.com/v4/letter/d/0ea827/32.png) [@Dmitry](https://tech-community.robotics.abb.com/u/Dmitry)\
**Post date:** [May 24, 2018, 8:57am UTC](https://tech-community.robotics.abb.com/t/signal-analyser-online-dosent-work-rs-6-07/8248/2 "2018-05-24T08:57:38Z")

</div>

It is not working for me also, and not only in 6.07, but in 6.05 and 6.06 also (dont have older versions). Tried also on a PC without firewall. I just don’t understand why it is not working, Online Monitor is working fine, I also see tcp packets in Wireshark with data, but nothing in RobotStudio. Pure magic, how it is supposed to work then… It must be straightforward.

---

<div class="post-metadata">

**Author:** ![DavidR](https://avatars.discourse-cdn.com/v4/letter/d/3ab097/32.png) [@DavidR](https://tech-community.robotics.abb.com/u/DavidR)\
**Post date:** [May 24, 2018, 6:16pm UTC](https://tech-community.robotics.abb.com/t/signal-analyser-online-dosent-work-rs-6-07/8248/3 "2018-05-24T18:16:28Z")

</div>

Hasn’t been working for me either for quite a while. Me and some of my colleagues have tried several times over the last year or so but without luck.

---

<div class="post-metadata">

**Author:** ![Amol](https://avatars.discourse-cdn.com/v4/letter/a/a4c791/32.png) [@Amol](https://tech-community.robotics.abb.com/u/Amol)\
**Post date:** [October 30, 2018, 6:44pm UTC](https://tech-community.robotics.abb.com/t/signal-analyser-online-dosent-work-rs-6-07/8248/4 "2018-10-30T18:44:44Z")

</div>

Hello everyone,if i am using the virtual controller then signal analyzer reads and shows the graph for TCP speed but when connecting to service port of actual controller then trying to read the TCP speed over RS 6.06.01 but not seen any values.if anybody finds the solution please share.

---

<div class="post-metadata">

**Author:** ![DavidR](https://avatars.discourse-cdn.com/v4/letter/d/3ab097/32.png) [@DavidR](https://tech-community.robotics.abb.com/u/DavidR)\
**Post date:** [November 8, 2018, 9:33pm UTC](https://tech-community.robotics.abb.com/t/signal-analyser-online-dosent-work-rs-6-07/8248/5 "2018-11-08T21:33:24Z")

</div>

I think Signal Analyser has been fixed since 6.07.01.
