# Simulation of BESetupToolJ  \[ArcWelding PowerPac\]

**URL:** <https://tech-community.robotics.abb.com/t/simulation-of-besetuptoolj-arcwelding-powerpac/4110>\
**Category:** PowerPacs\
**Created:** [April 7, 2011, 2:21pm UTC](https://tech-community.robotics.abb.com/t/simulation-of-besetuptoolj-arcwelding-powerpac/4110 "2011-04-07T14:21:59Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![TecAW](https://avatars.discourse-cdn.com/v4/letter/t/ecd19e/32.png) [@TecAW](https://tech-community.robotics.abb.com/u/TecAW)\
**Post date:** [April 7, 2011, 2:21pm UTC](https://tech-community.robotics.abb.com/t/simulation-of-besetuptoolj-arcwelding-powerpac/4110/1 "2011-04-07T14:21:59Z")

</div>

Hello

It is possible to simulate this instruction? I’ve tested in a simulation, but does not do the full cycle configuration, the detector signal I have simulated by LineSensor and working properly.

Thanks