# Simulation of Sensors

**URL:** <https://tech-community.robotics.abb.com/t/simulation-of-sensors/3803>\
**Category:** RobotStudio\
**Created:** [September 15, 2010, 5:36pm UTC](https://tech-community.robotics.abb.com/t/simulation-of-sensors/3803 "2010-09-15T17:36:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/system/32/6_2.png) [@system](https://tech-community.robotics.abb.com/u/system)\
**Post date:** [September 15, 2010, 5:36pm UTC](https://tech-community.robotics.abb.com/t/simulation-of-sensors/3803/1 "2010-09-15T17:36:56Z")

</div>

Hi!  
Can I simulate some sensors in RS? How to do it?  
Thanks.

---

<div class="post-metadata">

**Author:** ![Henrik\_Berlin](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/henrik_berlin/32/1011_2.png) [@Henrik\_Berlin](https://tech-community.robotics.abb.com/u/Henrik_Berlin)\
**Post date:** [September 16, 2010, 2:53pm UTC](https://tech-community.robotics.abb.com/t/simulation-of-sensors/3803/2 "2010-09-16T14:53:28Z")

</div>

You can use the SmartComponents _LineSensor_ and _PlaneSensor_. See the tutorials on the RobotStudio community ([www.robotstudio.com/community](http://www.robotstudio.com/community)). On the “Shared Content” section you will find the components created in the tutorials.