# simulation

**URL:** <https://tech-community.robotics.abb.com/t/simulation/1902>\
**Category:** RobotStudio\
**Created:** [May 30, 2008, 10:47am UTC](https://tech-community.robotics.abb.com/t/simulation/1902 "2008-05-30T10:47:43Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![carmila](https://avatars.discourse-cdn.com/v4/letter/c/4bbf92/32.png) [@carmila](https://tech-community.robotics.abb.com/u/carmila)\
**Post date:** [May 30, 2008, 10:47am UTC](https://tech-community.robotics.abb.com/t/simulation/1902/1 "2008-05-30T10:47:43Z")

</div>

hello, i have some geometries, like screw, conveyor,etc. can i simulate them in robotstudio? if yes, can i make it move(simulation) without the robots? and how to simulate it?

i have some project that i have to make robot moves accurate and synchronize with the screw and conveyor, but i don’t know how to make the path so accurately and synchronize.:grinning:

can somebody help me?

thanks before!

---

<div class="post-metadata">

**Author:** ![Anders\_S](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anders\_S](https://tech-community.robotics.abb.com/u/Anders_S)\
**Post date:** [May 31, 2008, 7:28pm UTC](https://tech-community.robotics.abb.com/t/simulation/1902/2 "2008-05-31T19:28:04Z")

</div>

Hi,

To move an object on for example a conveyor, the best is to create a mechanism of the conveyor, and then use the event “Move Mech To Pose” to move the object. You will find information in the RS Help about how to create a mechanism and use the Event Manager.

If you use a “Station Signal” to trig the event, you don’t need a robot system in the station.

---

<div class="post-metadata">

**Author:** ![carmila](https://avatars.discourse-cdn.com/v4/letter/c/4bbf92/32.png) [@carmila](https://tech-community.robotics.abb.com/u/carmila)\
**Post date:** [June 7, 2008, 5:28am UTC](https://tech-community.robotics.abb.com/t/simulation/1902/3 "2008-06-07T05:28:14Z")

</div>

thank you for your helps, anders. it’s very helpful

now, i want to simmulate the robot to pick up a box. i see the i/o simmulation movie from [http://library.abb.com/global/scot/scot241.nsf/veritydisplay /d7bf0f0992638187c1256b9d00285c07/$File/io\_simulation.avi](http://library.abb.com/global/scot/scot241.nsf/veritydisplay/d7bf0f0992638187c1256b9d00285c07/$File/io_simulation.avi)

but, i can’t find the signal and the value from the SETDO instruction.

i try to create the instruction template and create SETDO, but i find many error. actually, i don’t know how to fill the signal and value from the arguments:wink:. the error is looks like picture below.

i have read the rs help, but it doesn’t help. how to fill the arguments?

thanks a lot

regards,

---

<div class="post-metadata">

**Author:** ![Anders\_S](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@Anders\_S](https://tech-community.robotics.abb.com/u/Anders_S)\
**Post date:** [June 8, 2008, 3:51pm UTC](https://tech-community.robotics.abb.com/t/simulation/1902/4 "2008-06-08T15:51:53Z")

</div>

You have to add the I/O signals to the Robot System yourself. I/O signals can be configured in RobotStudio Online, which you can start from the Program menu in RS. In the RobotStudio Online Help will you find information about how to configure new I/O signals, or load an existing configuration file (EIO.cfg).

To be able to control the signals from RS, the “signal access level” has to be defined to “ALL”. I have attached an EIO.cfg with two DO and two DI signals that you can load into your system.

[2008-06-08\_155053\_EIO.zip](http://forums.robotstudio.com/webwiz/AndersS/2008-06-08_155053_EIO.zip)

---

<div class="post-metadata">

**Author:** ![carmila](https://avatars.discourse-cdn.com/v4/letter/c/4bbf92/32.png) [@carmila](https://tech-community.robotics.abb.com/u/carmila)\
**Post date:** [June 9, 2008, 6:34am UTC](https://tech-community.robotics.abb.com/t/simulation/1902/5 "2008-06-09T06:34:39Z")

</div>

hoho…, thanks anders!!:smile:

now, i can simmulate it. 👍 thankyou for your help.

thankkss!!!

regards,

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/system/32/6_2.png) [@system](https://tech-community.robotics.abb.com/u/system)\
**Post date:** [June 9, 2008, 6:35am UTC](https://tech-community.robotics.abb.com/t/simulation/1902/6 "2008-06-09T06:35:02Z")

</div>

Hi, you could add signals in an easier way by using virtual flexpendant (" pressing F5 ") go to control panel - configuration -signal .. don’t forget to turn the irc5 into manual mode by pressing little icon that looks like irc5 and flag the middle button .. (mr Jetman tips)

---

<div class="post-metadata">

**Author:** ![carmila](https://avatars.discourse-cdn.com/v4/letter/c/4bbf92/32.png) [@carmila](https://tech-community.robotics.abb.com/u/carmila)\
**Post date:** [June 9, 2008, 7:44am UTC](https://tech-community.robotics.abb.com/t/simulation/1902/7 "2008-06-09T07:44:06Z")

</div>

thank you for your tips! it’s very helpfull !! 😉

regards,
