# slow testing speed with "MOVE TO TARGET"

**URL:** <https://tech-community.robotics.abb.com/t/slow-testing-speed-with-move-to-target/1001>\
**Category:** RobotStudio\
**Created:** [February 5, 2007, 7:56am UTC](https://tech-community.robotics.abb.com/t/slow-testing-speed-with-move-to-target/1001 "2007-02-05T07:56:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hardikez](https://avatars.discourse-cdn.com/v4/letter/h/7bcc69/32.png) [@Hardikez](https://tech-community.robotics.abb.com/u/Hardikez)\
**Post date:** [February 5, 2007, 7:56am UTC](https://tech-community.robotics.abb.com/t/slow-testing-speed-with-move-to-target/1001/1 "2007-02-05T07:56:19Z")

</div>

hi i am using rs5.07

is there any way to speed up the proces when testing a target with “MOVE TO TARGET” in arcweld powerpack.

it is very slow especialy when testing a weld.

---

<div class="post-metadata">

**Author:** ![DanS](https://avatars.discourse-cdn.com/v4/letter/d/7993a0/32.png) [@DanS](https://tech-community.robotics.abb.com/u/DanS)\
**Post date:** [February 8, 2007, 4:04am UTC](https://tech-community.robotics.abb.com/t/slow-testing-speed-with-move-to-target/1001/2 "2007-02-08T04:04:55Z")

</div>

Just wait it out until 5.08, you’ll find it’s much faster in the upcoming version.