# SM Feature: Add UNDO function

**URL:** <https://tech-community.robotics.abb.com/t/sm-feature-add-undo-function/4454>\
**Category:** UpFeed\
**Created:** [October 6, 2011, 4:19pm UTC](https://tech-community.robotics.abb.com/t/sm-feature-add-undo-function/4454 "2011-10-06T16:19:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tedenljung](https://avatars.discourse-cdn.com/v4/letter/t/45deac/32.png) [@Tedenljung](https://tech-community.robotics.abb.com/u/Tedenljung)\
**Post date:** [October 6, 2011, 4:19pm UTC](https://tech-community.robotics.abb.com/t/sm-feature-add-undo-function/4454/1 "2011-10-06T16:19:42Z")

</div>

There is no undo functionality in ScreenMaker this would be nice!

---

<div class="post-metadata">

**Author:** ![AndersJ](https://avatars.discourse-cdn.com/v4/letter/a/f14d63/32.png) [@AndersJ](https://tech-community.robotics.abb.com/u/AndersJ)\
**Post date:** [October 7, 2011, 7:22am UTC](https://tech-community.robotics.abb.com/t/sm-feature-add-undo-function/4454/2 "2011-10-07T07:22:04Z")

</div>

Hello Daniel,

Thank you very much for this valuable feedback. We will add this to the “feature list” and bring it up for discussion.

Thanks again!

---

<div class="post-metadata">

**Author:** ![AN\_custom-pak](https://avatars.discourse-cdn.com/v4/letter/a/8edcca/32.png) [@AN\_custom-pak](https://tech-community.robotics.abb.com/u/AN_custom-pak)\
**Post date:** [October 13, 2011, 11:13pm UTC](https://tech-community.robotics.abb.com/t/sm-feature-add-undo-function/4454/3 "2011-10-13T23:13:00Z")

</div>

Issue was discussed today, Very informative meeting!