# Start up time application.

**URL:** <https://tech-community.robotics.abb.com/t/start-up-time-application/3215>\
**Category:** ScreenMaker\
**Created:** [November 26, 2009, 2:51pm UTC](https://tech-community.robotics.abb.com/t/start-up-time-application/3215 "2009-11-26T14:51:28Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rob\_ot](https://avatars.discourse-cdn.com/v4/letter/r/a9adbd/32.png) [@Rob\_ot](https://tech-community.robotics.abb.com/u/Rob_ot)\
**Post date:** [November 26, 2009, 2:51pm UTC](https://tech-community.robotics.abb.com/t/start-up-time-application/3215/1 "2009-11-26T14:51:28Z")

</div>

I have a the latest Flexpendant SxTPU version 3, but still to start-up my screen maker application, it takes up to 15 to 20 seconds.

The application is about 600 kb,

Is there a solution for this problem??

Thanks in advance

---

<div class="post-metadata">

**Author:** ![Abhishek\_PM](https://avatars.discourse-cdn.com/v4/letter/a/22d042/32.png) [@Abhishek\_PM](https://tech-community.robotics.abb.com/u/Abhishek_PM)\
**Post date:** [November 30, 2009, 11:19am UTC](https://tech-community.robotics.abb.com/t/start-up-time-application/3215/2 "2009-11-30T11:19:38Z")

</div>

Hello,

Would it be possible for you to share the application you are referring to, so that the problem can be analyzed.

Thanks

---

<div class="post-metadata">

**Author:** ![sunil\_sabut](https://avatars.discourse-cdn.com/v4/letter/s/e274bd/32.png) [@sunil\_sabut](https://tech-community.robotics.abb.com/u/sunil_sabut)\
**Post date:** [February 3, 2010, 8:38am UTC](https://tech-community.robotics.abb.com/t/start-up-time-application/3215/3 "2010-02-03T08:38:54Z")

</div>

Hi  
It depends upon the type of application you built ( data binding mechanism involved in your scree maker project). Flex Pendant -3 is having enough resources to handel comparably larger customised applications compared to flexPendant-2. Please look into your screen maker applications and see how complex it is and look for the opening time in FP.

Regards  
Sunil

---

<div class="post-metadata">

**Author:** ![harry147](https://avatars.discourse-cdn.com/v4/letter/h/b9bd4f/32.png) [@harry147](https://tech-community.robotics.abb.com/u/harry147)\
**Post date:** [March 15, 2010, 10:45am UTC](https://tech-community.robotics.abb.com/t/start-up-time-application/3215/4 "2010-03-15T10:45:42Z")

</div>

[QUOTE=Abhishek PM]Hello,

Would it be possible for you to share the application you are referring to, so that the problem can be analyzed.

Thanks  
[/QUOTE]

Hi according to me your hardware configuration is not sufficient for this software i mean your configuration is low comparison for this and one of think more virus have in system. remove all  
i hope you are agree.

Good luck