# Sync targets to virtual controller without adding to path?

**URL:** <https://tech-community.robotics.abb.com/t/sync-targets-to-virtual-controller-without-adding-to-path/6093>\
**Category:** RobotStudio\
**Created:** [April 24, 2014, 1:21pm UTC](https://tech-community.robotics.abb.com/t/sync-targets-to-virtual-controller-without-adding-to-path/6093 "2014-04-24T13:21:56Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![paul\_gkn](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/paul_gkn/32/2726_2.png) [@paul\_gkn](https://tech-community.robotics.abb.com/u/paul_gkn)\
**Post date:** [April 24, 2014, 1:21pm UTC](https://tech-community.robotics.abb.com/t/sync-targets-to-virtual-controller-without-adding-to-path/6093/1 "2014-04-24T13:21:56Z")

</div>

Is it possible to sync targets to the virtual controller without adding them to a path? This seems to be the only way to get them into the VC.

I have everything ‘ticked’ for synchronisation!

Cheers,

Paul.