# Sync to Station

**URL:** <https://tech-community.robotics.abb.com/t/sync-to-station/6033>\
**Category:** RobotStudio\
**Created:** [March 21, 2014, 9:44am UTC](https://tech-community.robotics.abb.com/t/sync-to-station/6033 "2014-03-21T09:44:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Peeters\_RC](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/peeters_rc/32/244_2.png) [@Peeters\_RC](https://tech-community.robotics.abb.com/u/Peeters_RC)\
**Post date:** [March 21, 2014, 9:44am UTC](https://tech-community.robotics.abb.com/t/sync-to-station/6033/1 "2014-03-21T09:44:18Z")

</div>

Hello,

I have a problem. I have a backup of a real robot. I also have all the graphic environment in robotstudio. I want to load the coordinate system and targets from the real robot environment to the virtual environment. I want to do this with ‘Sync to Station’.

When I do this all the workobjects are visible by ‘Path&Targets’ (the robtargets are not) but they are all in the baseframe of the robot. When I open the program in the Flexpendant all the workobject are on the correct position and I can move the robot to this position!

How is this possible?

Best Regards,