# Taf.exe error.

**URL:** <https://tech-community.robotics.abb.com/t/taf-exe-error/8336>\
**Category:** RobotStudio\
**Created:** [June 29, 2018, 1:49pm UTC](https://tech-community.robotics.abb.com/t/taf-exe-error/8336 "2018-06-29T13:49:48Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![ga\_esp](https://avatars.discourse-cdn.com/v4/letter/g/278dde/32.png) [@ga\_esp](https://tech-community.robotics.abb.com/u/ga_esp)\
**Post date:** [June 29, 2018, 1:49pm UTC](https://tech-community.robotics.abb.com/t/taf-exe-error/8336/1 "2018-06-29T13:49:48Z")

</div>

Hi all,

the last day appeared this screen while a warmstart. I shut down the controller and appear again the message. If I repeat the action normally(not always) the system run and all goes ok, but I don´t know the reason of this fail.

I have reading the forum and found other discussion talking about applications installed in the FP but this not my case.

Can someone help me?

Thanks in advance.

 ![image.jpg](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/1X/31b974b22b00c9cbbe10923737ab1e048458760d.jpeg)