# TCP/IP connection between RobotStudio and Camera

**URL:** <https://tech-community.robotics.abb.com/t/tcp-ip-connection-between-robotstudio-and-camera/3318>\
**Category:** RobotStudio\
**Created:** [January 25, 2010, 1:55pm UTC](https://tech-community.robotics.abb.com/t/tcp-ip-connection-between-robotstudio-and-camera/3318 "2010-01-25T13:55:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![scotch99](https://avatars.discourse-cdn.com/v4/letter/s/8e8cbc/32.png) [@scotch99](https://tech-community.robotics.abb.com/u/scotch99)\
**Post date:** [January 25, 2010, 1:55pm UTC](https://tech-community.robotics.abb.com/t/tcp-ip-connection-between-robotstudio-and-camera/3318/1 "2010-01-25T13:55:08Z")

</div>

Hello.  
Is it possible to connect some virtual robot created in Robot Studio with real camera using TCP/IP protocol? How can I create such connection?

---

<div class="post-metadata">

**Author:** ![krzychusnk](https://avatars.discourse-cdn.com/v4/letter/k/f19dbf/32.png) [@krzychusnk](https://tech-community.robotics.abb.com/u/krzychusnk)\
**Post date:** [February 21, 2010, 1:46pm UTC](https://tech-community.robotics.abb.com/t/tcp-ip-connection-between-robotstudio-and-camera/3318/2 "2010-02-21T13:46:38Z")

</div>

I think it is possible. TCP/IP address of Virtual Controller is 127.0.0.1. I was conecting 2 VC and VC with PC and it was working. Look at instructions like SocketCreate, SocketSend, SocketReceive.