# TCP

**URL:** <https://tech-community.robotics.abb.com/t/tcp/1672>\
**Category:** RobotStudio\
**Created:** [February 6, 2008, 3:19pm UTC](https://tech-community.robotics.abb.com/t/tcp/1672 "2008-02-06T15:19:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![nickel](https://avatars.discourse-cdn.com/v4/letter/n/e9c0ed/32.png) [@nickel](https://tech-community.robotics.abb.com/u/nickel)\
**Post date:** [February 6, 2008, 3:19pm UTC](https://tech-community.robotics.abb.com/t/tcp/1672/1 "2008-02-06T15:19:59Z")

</div>

I am trying to import a CAD model of a PKI500 with a tool changer and set it up as a tool. I have the real values from a Bullseye’d setup - system created from backup. How can I easily get this info into the create tool dialogue to get my XYZ directions correct?

---

<div class="post-metadata">

**Author:** ![Henrik\_Berlin](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/henrik_berlin/32/1011_2.png) [@Henrik\_Berlin](https://tech-community.robotics.abb.com/u/Henrik_Berlin)\
**Post date:** [February 12, 2008, 7:50am UTC](https://tech-community.robotics.abb.com/t/tcp/1672/2 "2008-02-12T07:50:16Z")

</div>

Hi Nick,

I suggest you have a look at the following link

[http://forums.robotstudio.com/forum\_posts.asp?T ID=1592](http://forums.robotstudio.com/forum_posts.asp?TID=1592)

---

<div class="post-metadata">

**Author:** ![nickel](https://avatars.discourse-cdn.com/v4/letter/n/e9c0ed/32.png) [@nickel](https://tech-community.robotics.abb.com/u/nickel)\
**Post date:** [February 24, 2008, 2:47pm UTC](https://tech-community.robotics.abb.com/t/tcp/1672/3 "2008-02-24T14:47:38Z")

</div>

Thanks Henrik,

All sorted now.
