# The ABB robotstudio can not display viewl

**URL:** <https://tech-community.robotics.abb.com/t/the-abb-robotstudio-can-not-display-viewl/1348>\
**Category:** RobotStudio\
**Created:** [July 23, 2007, 5:26am UTC](https://tech-community.robotics.abb.com/t/the-abb-robotstudio-can-not-display-viewl/1348 "2007-07-23T05:26:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![zencuiwa](https://avatars.discourse-cdn.com/v4/letter/z/13edae/32.png) [@zencuiwa](https://tech-community.robotics.abb.com/u/zencuiwa)\
**Post date:** [July 23, 2007, 5:26am UTC](https://tech-community.robotics.abb.com/t/the-abb-robotstudio-can-not-display-viewl/1348/1 "2007-07-23T05:26:20Z")

</div>

The ABB robotstudio can not display viewl When the robotstdio run. the reason is failed to initialize Renderer. please tell me how to solve the quesion. thank you very much!

---

<div class="post-metadata">

**Author:** ![j\_proulx](https://avatars.discourse-cdn.com/v4/letter/j/8c91f0/32.png) [@j\_proulx](https://tech-community.robotics.abb.com/u/j_proulx)\
**Post date:** [July 25, 2007, 10:19pm UTC](https://tech-community.robotics.abb.com/t/the-abb-robotstudio-can-not-display-viewl/1348/2 "2007-07-25T22:19:28Z")

</div>

Open Robot Studio. On the Welcome Screen, on the tool bar, select Tools / Options. Under the Graphics folder select Renderer. You have the options of OpenGL and Direct3D. Change the present selection. Press OK. Close Robot Studio. Re-Open Robot Studio and see if the View will now display.

BR

Jim Proulx