# Trouble with RobotStudio 2019.1 32-bit **URL:** \ **Category:** RobotStudio\ **Created:** [July 3, 2019, 1:12pm UTC](https://tech-community.robotics.abb.com/t/trouble-with-robotstudio-2019-1-32-bit/8942 "2019-07-03T13:12:25Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![SamR](https://avatars.discourse-cdn.com/v4/letter/s/a9adbd/32.png) [@SamR](https://tech-community.robotics.abb.com/u/SamR)\ **Post date:** [July 3, 2019, 1:12pm UTC](https://tech-community.robotics.abb.com/t/trouble-with-robotstudio-2019-1-32-bit/8942/1 "2019-07-03T13:12:25Z")
Dear support team, after upgrading to RobotStudio 7.0 (2019.1), we were not able to open/create projects with the 32-bit version. Also, the interface looks fairly different compared to the 64-bit version. We checked if there is an issue with the license, but the installed licenses are identical. Any ideas on what went wrong on our systems? A screenshot of a comparison between the interfaces and licenses is attached. Thank you in advance. Kind regards, Markus ![image.png](https://europe1.discourse-cdn.com/flex005/uploads/robotics1/original/2X/1/1037862288ff16c6a7ebc8c21e77fecea2e470af.png) ---
**Author:** ![Johannes\_Weiman](https://avatars.discourse-cdn.com/v4/letter/j/e47c2d/32.png) [@Johannes\_Weiman](https://tech-community.robotics.abb.com/u/Johannes_Weiman)\ **Post date:** [July 3, 2019, 1:42pm UTC](https://tech-community.robotics.abb.com/t/trouble-with-robotstudio-2019-1-32-bit/8942/2 "2019-07-03T13:42:17Z")
Hi, This is by design. Offline programming and modeling is deprecated in the 32-bit version; it only supports online operation. ---
**Author:** ![c63amg](https://avatars.discourse-cdn.com/v4/letter/c/7bcc69/32.png) [@c63amg](https://tech-community.robotics.abb.com/u/c63amg)\ **Post date:** [July 9, 2019, 4:29pm UTC](https://tech-community.robotics.abb.com/t/trouble-with-robotstudio-2019-1-32-bit/8942/3 "2019-07-09T16:29:23Z")
How do we import geometry? The only way I could import STEP was via 32bit.