# Trouble with RS 6.00

**URL:** <https://tech-community.robotics.abb.com/t/trouble-with-rs-6-00/6491>\
**Category:** RobotStudio\
**Created:** [February 12, 2015, 9:50am UTC](https://tech-community.robotics.abb.com/t/trouble-with-rs-6-00/6491 "2015-02-12T09:50:56Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![thamilton](https://avatars.discourse-cdn.com/v4/letter/t/e47774/32.png) [@thamilton](https://tech-community.robotics.abb.com/u/thamilton)\
**Post date:** [February 12, 2015, 9:50am UTC](https://tech-community.robotics.abb.com/t/trouble-with-rs-6-00/6491/1 "2015-02-12T09:50:56Z")

</div>

when editing rapid code the options for find or replace “find next” and “replace” are greyed out, the only option seems to be “find all” or “replace all”

is this something I am missing or a bug in the software?

Thanks

---

<div class="post-metadata">

**Author:** ![graafderk](https://avatars.discourse-cdn.com/v4/letter/g/cab0a1/32.png) [@graafderk](https://tech-community.robotics.abb.com/u/graafderk)\
**Post date:** [February 12, 2015, 10:18am UTC](https://tech-community.robotics.abb.com/t/trouble-with-rs-6-00/6491/2 "2015-02-12T10:18:10Z")

</div>

If I remeber correctly, you can only use “find next” and “replace” when you’re looking in the current document (under “look in:”, select “current document”)

---

<div class="post-metadata">

**Author:** ![thamilton](https://avatars.discourse-cdn.com/v4/letter/t/e47774/32.png) [@thamilton](https://tech-community.robotics.abb.com/u/thamilton)\
**Post date:** [February 12, 2015, 12:27pm UTC](https://tech-community.robotics.abb.com/t/trouble-with-rs-6-00/6491/3 "2015-02-12T12:27:22Z")

</div>

that was it, thanks for the help