# UAS settings

**URL:** <https://tech-community.robotics.abb.com/t/uas-settings/4847>\
**Category:** RobotStudio\
**Created:** [May 7, 2012, 9:17am UTC](https://tech-community.robotics.abb.com/t/uas-settings/4847 "2012-05-07T09:17:57Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![scott24](https://avatars.discourse-cdn.com/v4/letter/s/aeb1de/32.png) [@scott24](https://tech-community.robotics.abb.com/u/scott24)\
**Post date:** [May 7, 2012, 9:17am UTC](https://tech-community.robotics.abb.com/t/uas-settings/4847/1 "2012-05-07T09:17:57Z")

</div>

Hi,

We use the UAS settings. That means that by us, the default user has few rights on the robot. After the the loading of our UAS configuration, it is no more possible to load a new system with robot studio online to the bootserver. (with Ethernet)

Is there a solution to change the user used by “robot studio online system builder” by building the connection with the bootserver?

Is there a solution to erase the UAS settings of the robot and come back to the factory UAS settings?

Thanks a lot!😉

---

<div class="post-metadata">

**Author:** ![sinan78](https://avatars.discourse-cdn.com/v4/letter/s/c57346/32.png) [@sinan78](https://tech-community.robotics.abb.com/u/sinan78)\
**Post date:** [June 16, 2012, 2:42pm UTC](https://tech-community.robotics.abb.com/t/uas-settings/4847/2 "2012-06-16T14:42:46Z")

</div>

Hi

Connect the controller with HyperTerm and write “uas\_disable”

Best Regards

Sinan AYDIN / ROBOTMER

---

<div class="post-metadata">

**Author:** ![sturner](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/sturner/32/3432_2.png) [@sturner](https://tech-community.robotics.abb.com/u/sturner)\
**Post date:** [June 16, 2012, 10:31pm UTC](https://tech-community.robotics.abb.com/t/uas-settings/4847/3 "2012-06-16T22:31:52Z")

</div>

‘uas\_disable’… is tempory until the controller is restarted !