# Upgrading Robotware 6.05 to 6.11 Limitations

**URL:** <https://tech-community.robotics.abb.com/t/upgrading-robotware-6-05-to-6-11-limitations/15197>\
**Category:** General\
**Created:** [October 23, 2026, 6:21am UTC](https://tech-community.robotics.abb.com/t/upgrading-robotware-6-05-to-6-11-limitations/15197 "2026-10-23T06:21:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![YUSUF\_FERIK](https://avatars.discourse-cdn.com/v4/letter/y/dc4da7/32.png) [@YUSUF\_FERIK](https://tech-community.robotics.abb.com/u/YUSUF_FERIK)\
**Post date:** [October 23, 2026, 6:21am UTC](https://tech-community.robotics.abb.com/t/upgrading-robotware-6-05-to-6-11-limitations/15197/1 "2026-10-23T06:21:30Z")

</div>

I would like to use the DSQC1024 in place of the DSQC1018.  
Are there any hardware (HW) or software (SW) limitations?