# Use ArcRepL  \[ArcWelding PowerPac\]

**URL:** <https://tech-community.robotics.abb.com/t/use-arcrepl-arcwelding-powerpac/1165>\
**Category:** PowerPacs\
**Created:** [April 23, 2007, 5:42pm UTC](https://tech-community.robotics.abb.com/t/use-arcrepl-arcwelding-powerpac/1165 "2007-04-23T17:42:31Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bertie](https://avatars.discourse-cdn.com/v4/letter/b/9de0a6/32.png) [@Bertie](https://tech-community.robotics.abb.com/u/Bertie)\
**Post date:** [April 23, 2007, 5:42pm UTC](https://tech-community.robotics.abb.com/t/use-arcrepl-arcwelding-powerpac/1165/1 "2007-04-23T17:42:31Z")

</div>

Hello forum,  
is it possible to use the ArcRepL function in RS 5.08?  
Normaly it should work, but when I load the Instruction Template for ArcRepL the VC is missing the function Offset.

Best regards  
Bertie