# User Management

**URL:** <https://tech-community.robotics.abb.com/t/user-management/8123>\
**Category:** Developer Tools\
**Created:** [March 2, 2018, 11:11am UTC](https://tech-community.robotics.abb.com/t/user-management/8123 "2018-03-02T11:11:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rafaelbregalda](https://avatars.discourse-cdn.com/v4/letter/r/e9c0ed/32.png) [@rafaelbregalda](https://tech-community.robotics.abb.com/u/rafaelbregalda)\
**Post date:** [March 2, 2018, 11:11am UTC](https://tech-community.robotics.abb.com/t/user-management/8123/1 "2018-03-02T11:11:13Z")

</div>

Hello,

I have an application where I should control the user access and permissions. The UAS can do it, but one of the requirements of the project is that the password should expire after 90 days and I could not find an way to do it.

I have a PLC where I’m already doing the user and password management. Is there any way to change the active user from an input or to open specific flexpendant applications like Callibration and Backup/Restore from an input?

Thanks

---

<div class="post-metadata">

**Author:** ![soup](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/soup/32/1592_2.png) [@soup](https://tech-community.robotics.abb.com/u/soup)\
**Post date:** [March 6, 2018, 9:41pm UTC](https://tech-community.robotics.abb.com/t/user-management/8123/2 "2018-03-06T21:41:55Z")

</div>

I get what you’re asking for and not sure it’s possible. But you could connect a RobotStudio Job to Update UAS from a PC every 90 days…

How are you currently forcing the password expiration and renewal at 90 days from PLC code?