# VIRC5 ...AW system

**URL:** <https://tech-community.robotics.abb.com/t/virc5-aw-system/867>\
**Category:** RobotStudio\
**Created:** [September 28, 2006, 12:00pm UTC](https://tech-community.robotics.abb.com/t/virc5-aw-system/867 "2006-09-28T12:00:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Maurizio](https://avatars.discourse-cdn.com/v4/letter/m/9de053/32.png) [@Maurizio](https://tech-community.robotics.abb.com/u/Maurizio)\
**Post date:** [September 28, 2006, 12:00pm UTC](https://tech-community.robotics.abb.com/t/virc5-aw-system/867/1 "2006-09-28T12:00:52Z")

</div>

[2006-09-28\_115714\_AW\_Backup.zip](http://forums.robotstudio.com/webwiz/Maurizio/2006-09-28_115714_AW_Backup.zip)

Hello,😉

I got a sysfail error trying to use VIRC5. :nauseated\_face:

I created a system using the backup attached…( I tried using “new system from backup” and writing directly the right strings)

Someone could help me ?

Thanks in advance

Maurizio

---

<div class="post-metadata">

**Author:** ![Maurizio](https://avatars.discourse-cdn.com/v4/letter/m/9de053/32.png) [@Maurizio](https://tech-community.robotics.abb.com/u/Maurizio)\
**Post date:** [September 28, 2006, 1:51pm UTC](https://tech-community.robotics.abb.com/t/virc5-aw-system/867/2 "2006-09-28T13:51:33Z")

</div>

this is the error message I got :