# Virtual controller shut down application robotstudio

**URL:** <https://tech-community.robotics.abb.com/t/virtual-controller-shut-down-application-robotstudio/11232>\
**Category:** Robot Controller\
**Created:** [September 4, 2023, 10:37am UTC](https://tech-community.robotics.abb.com/t/virtual-controller-shut-down-application-robotstudio/11232 "2023-09-04T10:37:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![adm](https://avatars.discourse-cdn.com/v4/letter/a/6f9a4e/32.png) [@adm](https://tech-community.robotics.abb.com/u/adm)\
**Post date:** [September 4, 2023, 10:37am UTC](https://tech-community.robotics.abb.com/t/virtual-controller-shut-down-application-robotstudio/11232/1 "2023-09-04T10:37:55Z")

</div>

I am new one in robot programming and I have problem with robotstudio 2023.2 . When i am try to add virtual controller to some IRB robot to my project robotstudio freezes and turns off . I have no idea what i should to do in this case. Can someone please halp me??

---

<div class="post-metadata">

**Author:** ![Maxim](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/maxim/32/4429_2.png) [@Maxim](https://tech-community.robotics.abb.com/u/Maxim)\
**Post date:** [September 4, 2023, 10:39am UTC](https://tech-community.robotics.abb.com/t/virtual-controller-shut-down-application-robotstudio/11232/2 "2023-09-04T10:39:23Z")

</div>

This is most likely caused by your company’s anti virus software.  
Please reach out to your local IT support and ask them to white-list Installation Manager.exe in the anti-virus software.