# Virtual Flexpendant to control real flexpendant

**URL:** <https://tech-community.robotics.abb.com/t/virtual-flexpendant-to-control-real-flexpendant/11647>\
**Category:** RobotStudio\
**Tags:** flexpendant\
**Created:** [October 9, 2024, 3:38am UTC](https://tech-community.robotics.abb.com/t/virtual-flexpendant-to-control-real-flexpendant/11647 "2024-10-09T03:38:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![CRom11](https://avatars.discourse-cdn.com/v4/letter/c/779978/32.png) [@CRom11](https://tech-community.robotics.abb.com/u/CRom11)\
**Post date:** [October 9, 2024, 3:38am UTC](https://tech-community.robotics.abb.com/t/virtual-flexpendant-to-control-real-flexpendant/11647/1 "2024-10-09T03:38:25Z")

</div>

Hi,

I have 4 IRC5 controllers with only one flexpendant, all with PC Interface option. Is there a way have write access to the controller with the virtual flexpendant? I don’t need to move the robot just navigate the flexpendant without manually unplugging the flexpendant from one controller to plug it to another controller just to confirm a message or change a setting.

Thanks