# Visualize World Zones

**URL:** https://tech-community.robotics.abb.com/t/visualize-world-zones/7952
**Category:** UpFeed
**Created:** [November 11, 2017, 7:26pm UTC](https://tech-community.robotics.abb.com/t/visualize-world-zones/7952 "2017-11-11T19:26:30Z")
**Posts on this page:** 7
**Page:** 1

<div class="post-metadata">

### Author: ![THOD](https://avatars.discourse-cdn.com/v4/letter/t/4491bb/32.png) [@THOD](https://tech-community.robotics.abb.com/u/THOD)
#### Post date: [November 11, 2017, 7:26pm UTC](https://tech-community.robotics.abb.com/t/visualize-world-zones/7952/1 "2017-11-11T19:26:30Z")

</div>

It would be great if we can setup world zones offline and then be able to sync them to the controller. This would be a huge advantage!

---

<div class="post-metadata">

### Author: ![Snampo](https://avatars.discourse-cdn.com/v4/letter/s/82dd89/32.png) [@Snampo](https://tech-community.robotics.abb.com/u/Snampo)
#### Post date: [November 13, 2017, 4:42pm UTC](https://tech-community.robotics.abb.com/t/visualize-world-zones/7952/2 "2017-11-13T16:42:25Z")

</div>

Thils would be very helpful, +1

---

<div class="post-metadata">

### Author: ![Neily03](https://avatars.discourse-cdn.com/v4/letter/n/c6cbf5/32.png) [@Neily03](https://tech-community.robotics.abb.com/u/Neily03)
#### Post date: [November 14, 2017, 8:04am UTC](https://tech-community.robotics.abb.com/t/visualize-world-zones/7952/3 "2017-11-14T08:04:36Z")

</div>

+1

---

<div class="post-metadata">

### Author: ![jules\_verne82](https://avatars.discourse-cdn.com/v4/letter/j/eb8c5e/32.png) [@jules\_verne82](https://tech-community.robotics.abb.com/u/jules_verne82)
#### Post date: [November 15, 2017, 1:02pm UTC](https://tech-community.robotics.abb.com/t/visualize-world-zones/7952/4 "2017-11-15T13:02:47Z")

</div>

+1

---

<div class="post-metadata">

### Author: ![DavidR](https://avatars.discourse-cdn.com/v4/letter/d/3ab097/32.png) [@DavidR](https://tech-community.robotics.abb.com/u/DavidR)
#### Post date: [December 6, 2017, 2:48pm UTC](https://tech-community.robotics.abb.com/t/visualize-world-zones/7952/5 "2017-12-06T14:48:48Z")

</div>

+1.  
One other thing, when using “WZDOSet” in a RobotStudio station it seems like the output is not beeing updated when the robot is entering/leaving the zone.  
It’s updated once during a warmstart but after warmstart is completed it’s freezed.  
/David

---

<div class="post-metadata">

### Author: ![JeremyB](https://avatars.discourse-cdn.com/v4/letter/j/ad7895/32.png) [@JeremyB](https://tech-community.robotics.abb.com/u/JeremyB)
#### Post date: [November 1, 2018, 6:39am UTC](https://tech-community.robotics.abb.com/t/visualize-world-zones/7952/6 "2018-11-01T06:39:28Z")

</div>

+1

---

<div class="post-metadata">

### Author: ![DavidR](https://avatars.discourse-cdn.com/v4/letter/d/3ab097/32.png) [@DavidR](https://tech-community.robotics.abb.com/u/DavidR)
#### Post date: [November 9, 2018, 5:41pm UTC](https://tech-community.robotics.abb.com/t/visualize-world-zones/7952/7 "2018-11-09T17:41:24Z")

</div>

A workaround I use when I create a wz box is to set wobj0 to UCS and click in the graphics (sometimes I create a box) where you want your corners. The UCS coordinates are shown in bottom right corner of RobotStudio.