# vReset?

**URL:** <https://tech-community.robotics.abb.com/t/vreset/9380>\
**Category:** RAPID Programming\
**Created:** [March 18, 2020, 3:32pm UTC](https://tech-community.robotics.abb.com/t/vreset/9380 "2020-03-18T15:32:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eskatsaros](https://avatars.discourse-cdn.com/v4/letter/e/46a35a/32.png) [@Eskatsaros](https://tech-community.robotics.abb.com/u/Eskatsaros)\
**Post date:** [March 18, 2020, 3:32pm UTC](https://tech-community.robotics.abb.com/t/vreset/9380/1 "2020-03-18T15:32:53Z")

</div>

I came across a point in a program today that had vReset - what does that actually do?

---

<div class="post-metadata">

**Author:** ![lemster68](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/lemster68/32/1945_2.png) [@lemster68](https://tech-community.robotics.abb.com/u/lemster68)\
**Post date:** [March 18, 2020, 3:36pm UTC](https://tech-community.robotics.abb.com/t/vreset/9380/2 "2020-03-18T15:36:36Z")

</div>

If you mean it was specified in a move instruction for the speed, nothing. Just find where it is declared, it should just be the name someone chose to call it. AFAIK, speeddata cannot do anything else but determine the motion velocities.
