# Welcome to the new RobotWare forum!

**URL:** <https://tech-community.robotics.abb.com/t/welcome-to-the-new-robotware-forum/3159>\
**Category:** Robot Controller\
**Created:** [November 5, 2009, 3:54pm UTC](https://tech-community.robotics.abb.com/t/welcome-to-the-new-robotware-forum/3159 "2009-11-05T15:54:49Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/tech-community.robotics.abb.com/system/32/6_2.png) [@system](https://tech-community.robotics.abb.com/u/system)\
**Post date:** [November 5, 2009, 3:54pm UTC](https://tech-community.robotics.abb.com/t/welcome-to-the-new-robotware-forum/3159/1 "2009-11-05T15:54:49Z")

</div>

In this forum we invite you to write your questions regarding RobotWare functionality and options.

Topics from the “General Discussion” fourm regarding RobotWare have been moved to this new forum.

The main purpose of the forum is to let users share their experiences and questions with each other, but ABB will also try to clarify and help when neccessary and possible. However, for urgent support matters, please contact your local ABB representative.

Best regards,

**Fredrik Pahlm**  
**Moderator**  
**ABB Robotics R&D**

---

<div class="post-metadata">

**Author:** ![alijoon\_60](https://avatars.discourse-cdn.com/v4/letter/a/a3d4f5/32.png) [@alijoon\_60](https://tech-community.robotics.abb.com/u/alijoon_60)\
**Post date:** [October 21, 2010, 7:46am UTC](https://tech-community.robotics.abb.com/t/welcome-to-the-new-robotware-forum/3159/2 "2010-10-21T07:46:02Z")

</div>

Dear sir,

I have a **IRB5400-02** robinstall files in library,but no kxt files attached, so I can not make a system file and startup file for robot, where can I get the kxt files to continue the making It .

A.abaee

---

<div class="post-metadata">

**Author:** ![alijoon\_60](https://avatars.discourse-cdn.com/v4/letter/a/a3d4f5/32.png) [@alijoon\_60](https://tech-community.robotics.abb.com/u/alijoon_60)\
**Post date:** [October 21, 2010, 11:39am UTC](https://tech-community.robotics.abb.com/t/welcome-to-the-new-robotware-forum/3159/3 "2010-10-21T11:39:20Z")

</div>

my screenshot

![](http://forums.robotstudio.com/webwiz/3623/IRB5400-02.JPG)

---

<div class="post-metadata">

**Author:** ![Dr.Robot](https://avatars.discourse-cdn.com/v4/letter/d/bb73d2/32.png) [@Dr.Robot](https://tech-community.robotics.abb.com/u/Dr.Robot)\
**Post date:** [January 12, 2012, 11:39am UTC](https://tech-community.robotics.abb.com/t/welcome-to-the-new-robotware-forum/3159/4 "2012-01-12T11:39:16Z")

</div>

Hi, I am working to make a 3x IRB 2600ID + IRBP-R arc welding station and when I try to make the operation system from lay-out, the system can’t find a mediapool structure for 3 robots and a table.  
The result is a OS with the three robot and no IRBP-R.  
Where can I get this special configuration option to add to my mediapool library?

---

<div class="post-metadata">

**Author:** ![amindari](https://avatars.discourse-cdn.com/v4/letter/a/8c91f0/32.png) [@amindari](https://tech-community.robotics.abb.com/u/amindari)\
**Post date:** [January 12, 2012, 4:04pm UTC](https://tech-community.robotics.abb.com/t/welcome-to-the-new-robotware-forum/3159/5 "2012-01-12T16:04:56Z")

</div>

you can install robotware version 5.14

---

<div class="post-metadata">

**Author:** ![Gobi](https://avatars.discourse-cdn.com/v4/letter/g/76d3ee/32.png) [@Gobi](https://tech-community.robotics.abb.com/u/Gobi)\
**Post date:** [December 21, 2012, 3:05pm UTC](https://tech-community.robotics.abb.com/t/welcome-to-the-new-robotware-forum/3159/6 "2012-12-21T15:05:49Z")

</div>

hi  
Good evening i need s4c controller robotware boot disk(3.x) files.