# WeldGuide Problem

**URL:** <https://tech-community.robotics.abb.com/t/weldguide-problem/14948>\
**Category:** General\
**Created:** [April 28, 2026, 11:56am UTC](https://tech-community.robotics.abb.com/t/weldguide-problem/14948 "2026-04-28T11:56:35Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![matti](https://avatars.discourse-cdn.com/v4/letter/m/e480ec/32.png) [@matti](https://tech-community.robotics.abb.com/u/matti)\
**Post date:** [April 28, 2026, 11:56am UTC](https://tech-community.robotics.abb.com/t/weldguide-problem/14948/1 "2026-04-28T11:56:35Z")

</div>

Hallo, I encountered a problem where the WeldGuide “hangs”. So the robot is welding but there is not height or side correction anymore. The WeldGuide-Controller and FP has no error but in the WG View at FP is no correction shown.

The error occurs and persists over a certain time. PZ to Main oder Cold/WarmStart does not help.

As a result, the weld is not aligned.

Is there a method to restart the WG ?

matti
