# Wobject with Conveyor Tracking

**URL:** <https://tech-community.robotics.abb.com/t/wobject-with-conveyor-tracking/323>\
**Category:** RobotStudio S4\
**Created:** [March 14, 2005, 4:49pm UTC](https://tech-community.robotics.abb.com/t/wobject-with-conveyor-tracking/323 "2005-03-14T16:49:29Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jordi](https://avatars.discourse-cdn.com/v4/letter/j/53a042/32.png) [@Jordi](https://tech-community.robotics.abb.com/u/Jordi)\
**Post date:** [March 14, 2005, 4:49pm UTC](https://tech-community.robotics.abb.com/t/wobject-with-conveyor-tracking/323/1 "2005-03-14T16:49:29Z")

</div>

Hello,

I’m working on a painting application with conveyor tracking, and i must use three different wobjects with the same mechanical unit. When i move the conveyor, one of them change its position (so it’s ok), but the two other remain stopped.

It’s a problem of my configuration or it’s a RS limitation?

Thanks a lot for your attention.

Jordi

---

<div class="post-metadata">

**Author:** ![Thomas](https://avatars.discourse-cdn.com/v4/letter/t/e36b37/32.png) [@Thomas](https://tech-community.robotics.abb.com/u/Thomas)\
**Post date:** [March 16, 2005, 10:57am UTC](https://tech-community.robotics.abb.com/t/wobject-with-conveyor-tracking/323/2 "2005-03-16T10:57:16Z")

</div>

Hello Jordi,

Could you please make a Pack and Go of your station, and then make a .zip file of the Pack and go folder (your station name\_\_pack&go)?

Please also make a .zip file of your controller ( C:Program FilesCommon FilesABB AutomationControlsyour versionRobotsyour controller name).

Finally send both files to the following e-mail adress : [support\_software.serop@se.abb.com](mailto:support_software.serop@se.abb.com) and I will try to help you. 👍

---

<div class="post-metadata">

**Author:** ![Jordi](https://avatars.discourse-cdn.com/v4/letter/j/53a042/32.png) [@Jordi](https://tech-community.robotics.abb.com/u/Jordi)\
**Post date:** [March 16, 2005, 11:14am UTC](https://tech-community.robotics.abb.com/t/wobject-with-conveyor-tracking/323/3 "2005-03-16T11:14:06Z")

</div>

Hi Thomas,

Ok, i’ll send you today. Thank you in advance for your help.

Jordi.:grinning:

---

<div class="post-metadata">

**Author:** ![jan-jaap](https://avatars.discourse-cdn.com/v4/letter/j/6bbea6/32.png) [@jan-jaap](https://tech-community.robotics.abb.com/u/jan-jaap)\
**Post date:** [March 16, 2005, 11:20am UTC](https://tech-community.robotics.abb.com/t/wobject-with-conveyor-tracking/323/4 "2005-03-16T11:20:53Z")

</div>

Hello,

Do you use some sort of Paint powerpac on RobotStudio for creating paint paths?

---

<div class="post-metadata">

**Author:** ![Jordi](https://avatars.discourse-cdn.com/v4/letter/j/53a042/32.png) [@Jordi](https://tech-community.robotics.abb.com/u/Jordi)\
**Post date:** [March 17, 2005, 9:33am UTC](https://tech-community.robotics.abb.com/t/wobject-with-conveyor-tracking/323/5 "2005-03-17T09:33:42Z")

</div>

Hello Jan-jaap,

I’ve paint powerPac v.2.0, but i use standard options to create my paths. I use powerpac when i must put into the painting events, or for moving the conveyor the conveyor on teach mode, because it’s faster.

Tot ziens:+1:

Jordi