# World zone error acknowlage

**URL:** <https://tech-community.robotics.abb.com/t/world-zone-error-acknowlage/10146>\
**Category:** IRC5\
**Tags:** safety, worldzones, world-zone\
**Created:** [April 26, 2021, 9:07am UTC](https://tech-community.robotics.abb.com/t/world-zone-error-acknowlage/10146 "2021-04-26T09:07:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SelenErsoy](https://avatars.discourse-cdn.com/v4/letter/s/90ced4/32.png) [@SelenErsoy](https://tech-community.robotics.abb.com/u/SelenErsoy)\
**Post date:** [April 26, 2021, 9:07am UTC](https://tech-community.robotics.abb.com/t/world-zone-error-acknowlage/10146/1 "2021-04-26T09:07:15Z")

</div>

Dear ABB family,

I defined a world zone in my IRC5. It is an stationary worldzone. At the very beginning, when i was jogging (to test my world zone) I got an error message. Which is perfect. Then i acknowlage the message and start jogging again. I wanted the test for the second time.  
When i was inside of the box for the second time, i didint receive the error message.

Is this bcs I ackowlage it before?

Thank you in advance,

Selen Ersoy

---

<div class="post-metadata">

**Author:** ![SelenErsoy](https://avatars.discourse-cdn.com/v4/letter/s/90ced4/32.png) [@SelenErsoy](https://tech-community.robotics.abb.com/u/SelenErsoy)\
**Post date:** [April 26, 2021, 9:51am UTC](https://tech-community.robotics.abb.com/t/world-zone-error-acknowlage/10146/2 "2021-04-26T09:51:46Z")

</div>

I guess i figured my self out. When I add event routine (POWER ON). I said YES to all task and YES to all motion task.  
I changed to NO. Now i get error message everytime when i try to enter insie of the box

Does enyone know, what is All task, and all motion task means by event routine?
