# \#automatic

**URL:** https://tech-community.robotics.abb.com/tag/automatic/1229.md

[Latest](https://tech-community.robotics.abb.com/latest.md) · [Categories](https://tech-community.robotics.abb.com/categories.md) · [Tags](https://tech-community.robotics.abb.com/tags.md)

---

## [Set motors on via Command?](https://tech-community.robotics.abb.com/t/set-motors-on-via-command/11765)

<div class="topic-metadata">

**Author:** [@SwissStyle](https://tech-community.robotics.abb.com/u/SwissStyle)\
**Replies:** 5\
**Last updated:** [January 31, 2025, 6:35am UTC](https://tech-community.robotics.abb.com/t/set-motors-on-via-command/11765 "2025-01-31T06:35:00Z")

</div>

Hello We want to set the motors on our IRC5 compact (2011) via an external button My idea was that i Give the button his own E/A Signal and set the motors on if the signal is High Is there any command to set the motor…

---

## [Run automatically ScreenMaker application at controller startup](https://tech-community.robotics.abb.com/t/run-automatically-screenmaker-application-at-controller-startup/11040)

<div class="topic-metadata">

**Author:** [@dragolollo](https://tech-community.robotics.abb.com/u/dragolollo)\
**Replies:** 0\
**Last updated:** [February 24, 2023, 12:39pm UTC](https://tech-community.robotics.abb.com/t/run-automatically-screenmaker-application-at-controller-startup/11040 "2023-02-24T12:39:38Z")

</div>

Hello, I’d like to run automatically my ScreenMaker application when the controller is turned on or rebooted. I saw in ScreenMaker → Properties that I can select the startup as “automatic” but when I start the Virtual …