# \#configuration-issue **URL:** https://tech-community.robotics.abb.com/tag/configuration-issue/338.md [Latest](https://tech-community.robotics.abb.com/latest.md) · [Categories](https://tech-community.robotics.abb.com/categories.md) · [Tags](https://tech-community.robotics.abb.com/tags.md) --- ## [Motion Configuration - Drive Unit Position error (50272 error)](https://tech-community.robotics.abb.com/t/motion-configuration-drive-unit-position-error-50272-error/7965)
**Author:** [@jay\_c](https://tech-community.robotics.abb.com/u/jay_c)\ **Replies:** 1\ **Last updated:** [September 5, 2024, 4:23am UTC](https://tech-community.robotics.abb.com/t/motion-configuration-drive-unit-position-error-50272-error/7965 "2024-09-05T04:23:39Z")
Hello, I hope someone can assist me with a Motion Configuration parameter error. I’m having a discrepancy between my .MOC files between the Virtual and Physical controller. The problem is that we are using an independe… --- ## [Motion data missing after RobotWare 7.10.0 update](https://tech-community.robotics.abb.com/t/motion-data-missing-after-robotware-7-10-0-update/11206)
**Author:** [@Xiveid](https://tech-community.robotics.abb.com/u/Xiveid)\ **Replies:** 3\ **Last updated:** [July 4, 2024, 2:43am UTC](https://tech-community.robotics.abb.com/t/motion-data-missing-after-robotware-7-10-0-update/11206 "2024-07-04T02:43:11Z")
After updating my Robotstudio and RobotWare to the latest versions (RobotWare - 7.10.0), “Motion data missing” error appeared. I suspect that it might be versions incompatibility (previous RobotWare version is 7.8…). Con… --- ## [Blocked and can't read the configuration files](https://tech-community.robotics.abb.com/t/blocked-and-cant-read-the-configuration-files/9698)
**Author:** [@Amanda96](https://tech-community.robotics.abb.com/u/Amanda96)\ **Replies:** 5\ **Last updated:** [September 28, 2020, 9:33am UTC](https://tech-community.robotics.abb.com/t/blocked-and-cant-read-the-configuration-files/9698 "2020-09-28T09:33:18Z")
I have a problem, have been in contact with ABB and they do not really know what the problem is either unfortunately. Is about an IRC5, with SVIA Feedline pick vision, robot is from 2006 if I remember correctly. Is befo… --- ## [Robot axis configuration error](https://tech-community.robotics.abb.com/t/robot-axis-configuration-error/7285)
**Author:** [@SteveMob](https://tech-community.robotics.abb.com/u/SteveMob)\ **Replies:** 2\ **Last updated:** [July 29, 2016, 1:27pm UTC](https://tech-community.robotics.abb.com/t/robot-axis-configuration-error/7285 "2016-07-29T13:27:03Z")
Hello, I am getting this error when sending the robot arbitrary targets: I was wondering if anyone knew of a error handler or what the ERRNO is? Basically I want to send the user a warning message saying that the ta… --- ## [No Valid Configurations/Target out of reach](https://tech-community.robotics.abb.com/t/no-valid-configurations-target-out-of-reach/6944)
**Author:** [@SteveMob](https://tech-community.robotics.abb.com/u/SteveMob)\ **Replies:** 2\ **Last updated:** [December 22, 2015, 9:07pm UTC](https://tech-community.robotics.abb.com/t/no-valid-configurations-target-out-of-reach/6944 "2015-12-22T21:07:19Z")
Hello, I am fairly new to RobotStudio. I looked for some answers already but couldn’t really find what I was looking for so I will just explain my situation. I am trying to create some targets by clicking the down arrow… --- ## [Issue with configuration of IRB1600](https://tech-community.robotics.abb.com/t/issue-with-configuration-of-irb1600/6874)
**Author:** [@Luxrobotic](https://tech-community.robotics.abb.com/u/Luxrobotic)\ **Replies:** 3\ **Last updated:** [November 7, 2015, 12:23pm UTC](https://tech-community.robotics.abb.com/t/issue-with-configuration-of-irb1600/6874 "2015-11-07T12:23:48Z")
Good morning everybody, I have a station with 2 IRB 1600. When I try to setup the configurations, for some paths, I can’t find the correct config in the list. For this position, I need to use \[0,0,0,2\], it’s not availa…