# \#general-stop

**URL:** https://tech-community.robotics.abb.com/tag/general-stop/909.md

[Latest](https://tech-community.robotics.abb.com/latest.md) · [Categories](https://tech-community.robotics.abb.com/categories.md) · [Tags](https://tech-community.robotics.abb.com/tags.md)

---

## [Avoid event message with ScreenMaker App](https://tech-community.robotics.abb.com/t/avoid-event-message-with-screenmaker-app/11260)

<div class="topic-metadata">

**Author:** [@gea\_gfantechi](https://tech-community.robotics.abb.com/u/gea_gfantechi)\
**Replies:** 0\
**Last updated:** [October 9, 2023, 6:28am UTC](https://tech-community.robotics.abb.com/t/avoid-event-message-with-screenmaker-app/11260 "2023-10-09T06:28:57Z")

</div>

Hi everyone, how can I get rid of GS/AS open events (ID 90205 and 90206) coming to foreground on FlexPendant, so that my ScreenMaker’s app remains on top when AS or GS is open? Thanks Gabriele

---

## [Panel unit safety connection / Two channel fault](https://tech-community.robotics.abb.com/t/panel-unit-safety-connection-two-channel-fault/9814)

<div class="topic-metadata">

**Author:** [@MD22](https://tech-community.robotics.abb.com/u/MD22)\
**Replies:** 1\
**Last updated:** [November 19, 2020, 4:14pm UTC](https://tech-community.robotics.abb.com/t/panel-unit-safety-connection-two-channel-fault/9814 "2020-11-19T16:14:37Z")

</div>

Hi, I’m having two channel fault (error #20212) issues with an IRC 5 controller running RW 5.15. The electrician connected a lockout switch to GS1, breaking the +24V signal at X5.10. When operators go in the cell, they l…

---

## [Simulate Safemove Stop Configurations](https://tech-community.robotics.abb.com/t/simulate-safemove-stop-configurations/9568)

<div class="topic-metadata">

**Author:** [@JonKamstra](https://tech-community.robotics.abb.com/u/JonKamstra)\
**Replies:** 1\
**Last updated:** [June 11, 2020, 2:11pm UTC](https://tech-community.robotics.abb.com/t/simulate-safemove-stop-configurations/9568 "2020-06-11T14:11:15Z")

</div>

Is there a way to simulate or disable Visual SafeMove stop configurations for simulation in RobotStudio? I have stop configurations for General Stop and Auto Stop but since there is no PLC connected to the simulation the…