# \#network

**URL:** https://tech-community.robotics.abb.com/tag/network/925.md

[Latest](https://tech-community.robotics.abb.com/latest.md) · [Categories](https://tech-community.robotics.abb.com/categories.md) · [Tags](https://tech-community.robotics.abb.com/tags.md)

---

## [No Access to Network Drive](https://tech-community.robotics.abb.com/t/no-access-to-network-drive/11172)

<div class="topic-metadata">

**Author:** [@Siepen](https://tech-community.robotics.abb.com/u/Siepen)\
**Replies:** 1\
**Last updated:** [July 3, 2023, 3:56pm UTC](https://tech-community.robotics.abb.com/t/no-access-to-network-drive/11172 "2023-07-03T15:56:00Z")

</div>

Since the Update to 2023.2 its not possible anymore to access data on a Network Drive. Am i the only one? The paths for Geometry and Librarys are also not working.

---

## [System Failure due to network problems](https://tech-community.robotics.abb.com/t/system-failure-due-to-network-problems/10612)

<div class="topic-metadata">

**Author:** [@MDFB](https://tech-community.robotics.abb.com/u/MDFB)\
**Replies:** 0\
**Last updated:** [March 2, 2022, 5:15pm UTC](https://tech-community.robotics.abb.com/t/system-failure-due-to-network-problems/10612 "2022-03-02T17:15:01Z")

</div>

Hi there, I have the following problem: only two IRB 6700 - RW 6.08.01 from more than ten identical robots connected to the same network, entered in a system failure state, aparently after a network loop. After restorin…

---

## [SocketConnect causes unrecoverable error on invalid address string](https://tech-community.robotics.abb.com/t/socketconnect-causes-unrecoverable-error-on-invalid-address-string/9644)

<div class="topic-metadata">

**Author:** [@FlorianAumann](https://tech-community.robotics.abb.com/u/FlorianAumann)\
**Replies:** 2\
**Last updated:** [July 7, 2021, 10:30am UTC](https://tech-community.robotics.abb.com/t/socketconnect-causes-unrecoverable-error-on-invalid-address-string/9644 "2021-07-07T10:30:18Z")

</div>

When trying to start a socket connection as a client using the SocketConnect command, I ran into the issue that this command will cause an unrecoverable error on my system in case the address string is invalid. (I am cu…

---

## [Create file, then save to network location](https://tech-community.robotics.abb.com/t/create-file-then-save-to-network-location/9669)

<div class="topic-metadata">

**Author:** [@BigApe](https://tech-community.robotics.abb.com/u/BigApe)\
**Replies:** 2\
**Last updated:** [September 15, 2020, 5:18am UTC](https://tech-community.robotics.abb.com/t/create-file-then-save-to-network-location/9669 "2020-09-15T05:18:45Z")

</div>

Hi, I’m currently working on logging data from our welding robot (Arc ONtime, program execution time etc.), and would like for the program to write the logged data to a file saved on our server. My question: Is it pos…

---

## [Create file, then save to network location](https://tech-community.robotics.abb.com/t/create-file-then-save-to-network-location/9680)

<div class="topic-metadata">

**Author:** [@BigApe](https://tech-community.robotics.abb.com/u/BigApe)\
**Replies:** 4\
**Last updated:** [September 1, 2020, 10:35am UTC](https://tech-community.robotics.abb.com/t/create-file-then-save-to-network-location/9680 "2020-09-01T10:35:05Z")

</div>

Hi, I’m currently working on logging data from our welding robot (Arc ONtime, program execution time etc.), and would like for the program to write the logged data to a file saved on our server. My question: Is it pos…
