# \#trace

**URL:** https://tech-community.robotics.abb.com/tag/trace/990.md

[Latest](https://tech-community.robotics.abb.com/latest.md) · [Categories](https://tech-community.robotics.abb.com/categories.md) · [Tags](https://tech-community.robotics.abb.com/tags.md)

---

## [RobotApp "PartTrace" - How to use?](https://tech-community.robotics.abb.com/t/robotapp-parttrace-how-to-use/10507)

<div class="topic-metadata">

**Author:** [@tph\_kit](https://tech-community.robotics.abb.com/u/tph_kit)\
**Replies:** 2\
**Last updated:** [December 21, 2021, 2:05pm UTC](https://tech-community.robotics.abb.com/t/robotapp-parttrace-how-to-use/10507 "2021-12-21T14:05:11Z")

</div>

Dear all, I want to use the RobotApp “PartTrace”, which should create a sweep volume of parts attaced to the robot, see here: ABB-RobotApps (robotstudio.com) For testing, I have created a setup where I create a new too…

---

## [RS 2020.4 Signal Tracing not translated](https://tech-community.robotics.abb.com/t/rs-2020-4-signal-tracing-not-translated/9946)

<div class="topic-metadata">

**Author:** [@daguilar](https://tech-community.robotics.abb.com/u/daguilar)\
**Replies:** 1\
**Last updated:** [June 10, 2021, 8:11am UTC](https://tech-community.robotics.abb.com/t/rs-2020-4-signal-tracing-not-translated/9946 "2021-06-10T08:11:55Z")

</div>

As the screenshot above shows, the new signal tracing panel is not fully translated. My RS is in spanish but I see some options in German.