Go To position - not working

Collaborative Robots
1

With the Flex Pendant I highlight the position, then Debug, and select Go to position. However, it the robot does not move to this position. Is there something I am missing?
IRB14000 YUMI

2

I never used the Yumi, but in other robots you use the jog screen to go to or move to position.

3

I’m not sure how to get to a position from the Jog function. Nothing shows up in the list, at least not in the virtual controller. I will have to connect and see if it works.

4

I opened the Program Editor, and selected the position, then selected Go To position. I hold down the Go To button, and nothing.
I don’t get it - shouldn’t the robot move to the position?

5

You need to be in the jogging screen, and tap Go To as below.
Ensure you have the correct tool and workobject (if used) selected in the jogging screen.
The Go To uses these as the co-ordinate systems to use with the Robtarget…

image.jpg
image.jpg638×478 81.8 KB

This opens a new screen where you can select the position…
Only works for named Robtargets not inline (*) Robtargets

image.jpg
image.jpg642×485 65.3 KB

6

Well, that is starting to make sense. I was wondering why I did not see any positon targets in the window. All my positions are “jointtargets”. I guess I will need to change these to robtargets.
Thank you for the clarification.

CONST jointtarget PposStart:=[[58.5188,-73.4665,44.0647,-1.55973,13.5018,-14.7421],[-74.036,9E+09,9E+09,9E+09,9E+09,9E+09]];
CONST jointtarget PposInsert:=[[65.9099,-68.1386,28.8881,-0.762834,45.0241,-55.3991],[-97.1017,9E+09,9E+09,9E+09,9E+09,9E+09]];
CONST jointtarget PposDrop:=[[53.3995,-68.1223,18.8865,-1.63301,66.5549,-55.2394],[-92.2589,9E+09,9E+09,9E+09,9E+09,9E+09]];

PROC main()
MoveToHomeR;
HalfSyncR;
!FullSyncR;
MoveToHomeR;
ENDPROC

PROC MoveToHomeR()
MoveAbsJ pHomeR\NoEOffs, v1000, z0, gripRight\WObj:=wobjTable;
g_GripOut;
ENDPROC

PROC HalfSyncR()
WaitSyncTask\inpos,sync1,tasklist;!-----------------------------------------wait sync1 - wait until both arms have homed…

g_GripOut;
MoveAbsJ pPosAppr\NoEOffs, v1000, z50, gripRight\WObj:=wobjTable;
WaitUntil \inpos, TRUE;
!WaitTime 1;

MoveAbsJ pPosPick\NoEOffs, v1000, z50, gripRight\WObj:=wobjTable;
WaitUntil \inpos, TRUE;
!WaitTime 1;

7

Is it possible to change these jointtargets to robtargets?

8

Use the Function CalcRobT

9

I tried this, however, the syntax seems to be incorrect:

Var robtarget p1;
CONST jointtarget pPosAppr:=[[48.6457,-47.2697,63.7466,44.4377,-57.9163,2.44986],[-81.4889,9E+09,9E+09,9E+09,9E+09,9E+09]];
p1 := CalcRobT(pPosAppr, gripRight\WObj:=wobjTable;

PROC main()
MoveToHomeR;
HalfSyncR;
!FullSyncR;
MoveToHomeR;
ENDPROC

PROC MoveToHomeR()
MoveAbsJ pHomeR\NoEOffs, v1000, z0, gripRight\WObj:=wobjTable;
g_GripOut;
ENDPROC

PROC HalfSyncR()
WaitSyncTask\inpos,sync1,tasklist;!-----------------------------------------wait sync1 - wait until both arms have homed…

g_GripOut;
MoveAbsJ pPosAppr\NoEOffs, v1000, z50, gripRight\WObj:=wobjTable;
WaitUntil \inpos, TRUE;
WaitTime 1;

10

You have left out the end parenthesis.

11

Unfortunately that did not fix it.

I did manage to change all the jointtargets to robtargets, just had to go to each one step-by-step and add a new instruction.

Would be nice to know why its not working.