Problem about Boot Application

Robot Controller
1

I was going to download a new system to the controller(IRC5) via “System Builder” in RobotStudio 6.07. But it showed “there is not enough space on it”.

image.jpg
image.jpg1440×1080 168 KB

I searched on the Internet and someone suggested that I can delete the current system in the controller. So, I deleted the old system.

Then I tried downloading my system and it was successful.

image.jpg
image.jpg1440×1080 199 KB

Then I clicked on the “yes” button to restart the controller. However, I took me to the boot application showed on the FlexPendant, like this:

image.jpg
image.jpg1440×1080 119 KB

Then I clicked on “Select System**”, I cannot see the downloaded system** which was showed has downloaded successfully in RobotStudio.

image.jpg
image.jpg1440×1080 127 KB

I tried to download from RobotStudio again, it showed that “not enough space” again.

I also tried to make a boot media from the backup to a USB stick to install it, the problem was still “not enough space”.

image.jpg
image.jpg1440×1080 151 KB

Overall, at the moment, I cannot download a system, I cannot delete a system, I cannot do anything. What I can see is just this browser after restarting the controller.

image.jpg
image.jpg1440×1080 119 KB

Could someone tell me what I can do to solve this? Thank you very much!

2

Is the controller able to run RW6.xx?

If it is an older system with the older main computer you have to use RW5.xx.

3

Hi graemepaulin, thank you very much.

I am not sure if the controller is able to run RW 6.xx.
The version of RW I used is 5.13.4001.04. My RobotStudio version is 6.07. Is it OK?
Thank you again!

4

Yes this is OK

Have you powered off the controller, wait 30 seconds or so then power on again?

5

Yes, I think I have done this. I powered off the controller last Friday and I powered on today. Actually, I tried this several times last week. Thank you so much. What else can i do?

6

Please ring the New Zealand ABB contact center on 0800 464 222 and ask for me (Graeme Paulin)

7

OK, sure. Thank you very much!

8

Hey there,
Did you solve this problem?
I’m in the same situation!