Station Logic delete I/O Signals from Controllerbox

RobotStudio
1

Hey Everyone,
Is it possible to delete the Signals at the Controller Box in the Station Logic? I don’t want to delete the Signal in the I/O System, just in the Station Logic at the controller box (highlited signal in the picture below). From the drop down menu you can choose a signal. But when you have it in your Controller Box I find no way to delete it again.
Thank you

image.png
image.png526×522 68.2 KB

2

Hello,
Signals are keep until you restart your station.

3

Hey Denis,
but is it possible to delete them in the Station logic from my Controllerblock (picture above) without deleting it from my I/O System. There are signals on my controllerblock I don’t use anymore in my station logic. But I want to keep them in my I/O System. To make my bindings in the station logic clearer, I want to clear the unused signals from my controllerblock.

Thanks

4

ok, sorry. I got it Denis. A restart of Robotstudio works. A restart of the controller is not enough.
Problem solved,

thanks.

5

Hi,
Restart of RS is not needed. It should be enough to close and re-open Station Logic.