It seems that I have a problem using the 3dp power pack with the robot IRB6720, when ever I try to export the 3dp design I get this message (3DP_EXPORT FOLDERis missing in system), on the other hand the powerpac works perfectly fine with any robot that is robotware 6.0.
Hi Shadi,
When using a RW7 system (Omnicore) with the 3DP PowerPac, follow these steps:
-
Install the latest 3DP RW Add-In for Omnicore.
-
Right click the Virtual Controller and select Modify Installation in the context menu.
-
In Software - Available, Include the 3DP Add-In.
-
In the tab Options click on Application 3DP and select the print process you want to use.
-
Click Apply and Reset.
After the Virtual Controller has restarted, it should hopefully work better. Don’t forget to also install the 3DP RW Add-In on your physical robot controller.
Regards,
Anders
1 Like
Thank you, I will try this method.