I have a IRC5 compact controller
how i connect this I/O?
I dont look data sheets of this.
Thanks
see attached circuit diagram - if you are not using an external power supply you need to connect the 0 and 24 VDC from XS16 (last page in attached).
IRC5 compact IO circuit diagram.pdf (101 KB)
I have a problem, in the power supply have 24 V but in pin 9-10 of outputs DSQC652 not have any. I probe all and not work… See the picture, in the first have “V” in the rest "mV"
icture,
two
Yes you need to connect the 24 volt from the XS16 connector (pin 1 or 3) to the X14 or 15 pin 10 (pin 10 is on X14 is connected to pin 10 on XS15 internally so you only need to connect to one of them). Also 0 volt from XS16 (pin 2 or 4) to XS12 or XS13, and XS14 or XS15 pin 9.
Thanks you so much @graemepaulin I probe this and it is work 