Devicenet and AC500 PLC

Robot Controller
1

Hi There,

I am trying to integrate a AC500 PLC with a devicnet master card with an IRC5 controller. The controller was delivered with RW 5.7 and has been upgraded to RW 5.13. I have tried several configurations and none of them work! It is driving me nuts!

I have used the DN_INTERNAL_SLAVE without success. Has any one tried this and been successful?

Any tips will help.

Thanks, Russell

2

After Messing around with it for 4 days I finally used a FBP and solved the problem that way. It looks like the Devicnet card was faulty all along.