Program does not execute continuously in the Main Module

RAPID Programming
,
1

Hi,

I’m having a problem running the program continuously in PROC main ( ). When the controller is switched to Automatic Mode it executes the program in the PROC main ( ) but it stops after the program finishes and does not run continuously as it should.

image.png
image.png1920×1080 232 KB

2

Is the run mode (middle of RAPID tab) in continuous?

3

You know, you are not required to be so specific about your location in your profile…

4
5

image.jpg
image.jpg793×192 88.6 KB

6

Thank you, I changed it.

7

Thank you, this is a learning curve for me. I can’t believe I missed such a simple mistake