Hi, I have an issue where Robot Studio freezes after simulation (or two).
Top maniu (Home, Modeling and etc) is working also all menu icons like restart controller and etc, however all items on the left side is not selectible, either in Home window, Controller or Rapid. I have to close RS and open it again for it to be functional. I have recorded I video of it just not sure where to upload.
There is no error messages on the output log. Tryed to create Pack&Go and start from it, didn’t help. Reinstalled RS, no luck either. I would appreciate any help.
Hi Maxim
Thank you for your reply and pointing out to check Support tool.
I spoke with colleague at ABB and he suggested that issue might be related due simulation clock, which I run as fast as possible. I just run a few tests, and with normal speed simulation I don’t have any freezes, it just takes much longer to test it.
I’ll try with limiting to 2x speed to see if I have any issues.
Some info from logs is below.
Thanks!
Vid
00:04:02.1117677|ActiveWindowChanged|RapidEditorWindow|NoId
00:04:02.1737444|RibbonTabChanged|Controller
00:04:06.5870072|ExecutedCommand|FileClose
00:04:06.6079277|ControllerConnectionState|{DEDFC699-0446-4576-9406-5FDD67D8C81E}|0
00:04:06.6119334|ControllerConnectionState|{302D42E8-3720-497D-8D2E-678063A6B3F3}|0
00:04:06.6538282|UnhandledException|UIEnvironment_Exception
00:04:06.6558227|Exception|47d3235a-0f02-450e-85c2-71d0d1ed977e|System.ObjectDisposedException|UserVisible
----EXCEPTION BEGIN----
EnvironmentAPI
Cannot access a disposed object.
Object name: ‘this’.
at RobotStudio.Services.RobApi.RobControllerConnection.GetExtension[T](String id)
at RobotStudio.UI.Rapid.IndicatorMargin.UIEnvironment_Idle(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at ABB.Robotics.RobotStudio.Environment.UIEnvironment.RaiseIdle()
----EXCEPTION END----