Station_MultiMove independent with two conveyor

RobotStudio
1

Hello,

I kindly ask for help by the station building for Multi Move independent system with two robots and two conveyor-tracking (for each robot one conveyor).

I can build the station with conveyor tracking only for the single system!

Any idea how to do this? I hope, Robot Studio support this?

Thanks

2

I have created a station with one MultiMove Independent system containing two robots having one conveyor each. RobotStudio supports the setup, but the configuration data for the controller must be manually adopted to the two-conveyor case. See attached Pack&Go file and movie.

Pack&Go (unzip first then open in RobotStudio with Unpack&Work)
webwiz/772/TwoRobots_TwoConv.zip

Movie (requires the Xvid codec, see http://www.xvidmovies.com/codec/)
webwiz/772/MultiMove_TwoRobots_TwoConveyors_XVID.zip

3

Dear A?Henrik,

thanks a lot for your fast response and support.