Conveyor tracking with S4c controller

Robot Controller
1

Hi friends,

Can any one let me know whether IRB 6400 /2.8/120 robot with S4c controller can be used with conveyor tracking ? Presently the robot does not have conveyor tracking software installed in it. Is it possible to install the software and use with the same S4c controller ? :frowning:

2

Hello
Attached is the Conveyor Tracking Manual for S4C. You will need an Encoder Unit DSQC 354, in addition to the Conveyor Tracking software

webwiz/222/ConvTrack.zip

BR
Jim Proulx

3

Hello Jim Proulx,

Thank you very much for the information :wink:. It is a valuable input for my project and the manual is also going to be a wonderful support to me. :+1: Once again thanking you for the information.

4

is it possible to achieve conveyor tracking without the software??? can anybody tell me how to go about this??

5

Hello j_proulx,
Thank you for the manuel, it is very useful,
Best Regards

6

Mr j_proulx,

Thank you for the downloading link, seems to be really useful.

Regards.