Wondering if anyone else has experienced this issue, When starting a PickMaster PC from a cold start sometimes the machine does not startup with the Pleora Ethernet Drivers installed and likewise the system will not start. If you reboot the PC the system may fix itself sometimes it takes multiple re-boots. PC has these events in the Event Log which appear to be related.
System Log:
The description for Event ID 2 from source EbPro1000 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The description for Event ID 4 from source EbBusDriver cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Application Log:
The description for Event ID 1 from source PickMaster cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
[12334] A license for Gigabit Ethernet vision was detected, but no such camera was found. Please, check the connections and IP addresses of the camera(s).
The description for Event ID 3012 from source LoadPerf cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Performance
The description for Event ID 3011 from source LoadPerf cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
WmiApRpl
WmiApRpl
The description for Event ID 1 from source PickMaster cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
[12322] The camera with MAC ‘00-30-53-10-03-B8’ and IP ‘192.168.101.101’ cannot be found. Please reconfigure the camera settings.
Any help would be greatly appreciated…